Products for Homeowners
Compact & Utility Tractors
Products for Commercial Landscapers & Builders
Gator Utility Vehicles
Products for Farmers
Golf & Sports Turf
(4)
The Gator™ XUV Crossover Series Utility Vehicle has a precision-engineered drivetrain system that fully utilizes engine power, optimizing acceleration, hauling, towing, and hill-climbing capabilities. Power is transmitted from the engine through a continuously variable clutch system to the transaxle.Key elements of the drive system include:
The variable-speed drive consists of two clutches and a drive belt:
Features include:
How the variable-speed drive works:
Operator interface features:
Transaxle features:
NOTE: Differential design reduces scuffing of the turf during turns because it allows the inside wheels to turn slower than the outside wheels.
MFWD features:
Drive shaft features:
The machine is powered by an 812-cc (49.6-cu in.), 3-cylinder, dual overhead cams, liquid-cooled, four-cycle gasoline engine. It produces 6.5 kgm (47 lb-ft) of torque at 3200 rpm. The advanced electronic controls and fuel-injection system deliver superb starting, idling, and throttle response during operation.The engine offers the following performance and reliability features:
* The engine horsepower information is provided by the engine manufacturer to be used for comparison purposes only. The actual operating horsepower will be less.
To complement the most capable frame available in a high-performance utility vehicle, the XUV is equipped with four-wheel independent suspension.A dual A-arm front and rear suspension provides a smooth ride over challenging terrain and excellent hauling characteristics.The entire suspension system has been optimized to handle no cargo to maximum cargo without compromising ride quality or vehicle stability.
Dual A-arm independent rear suspension features include:
The deluxe cargo box consists of a 15 percent glass-filled polypropylene composite material that eliminates rust, dents, and reduces noise.
The tailgate can be opened or removed for easier cleanout and to carry longer items. The tailgate has been improved, features truck-like performance, and can be operated with one hand.The standard installed lanyards can also be removed to lower the tailgate to 150 degrees for convenient loading and unloading tasks.
The deluxe cargo box is easier to latch, unlatch, raise, and lower with the integrated handle design and gas assist.A prop rod is provided to hold the box in the upright position for operator convenience, as well as limit box pivot travel.
The deluxe cargo box offers integrated tie-down points for increased versatility. Tie down points are located in the following areas:
The deluxe cargo box easily converts to a flat bed. The flatbed configuration allows loading larger cargo.
Optional accessories for the deluxe cargo box include:
CAUTION: Carrying extra-long cargo that extends beyond the box can adversely affect stability.
This Gator™ XUV Crossover Utility Vehicle is equipped with power steering and a dual A-arm front suspension. These automotive-type systems exhibit excellent handling characteristics, as well as responsive steering and low steering effort:
Electric power-assist steering (EPAS) system has advanced features:
With the EPAS system, the operator maintains a direct, mechanical linkage from the steering wheel to the front wheels. The power-steering system interfaces mechanically with the steering system by being inserted between the steering wheel and the rack-and-pinion assembly.A differential torque sensor is integrated into the power steering assembly. The circuit board assembly is also integral with the power-steering assembly.Power steering does not reduce turning radius but significantly reduces steering effort by approximately 85 percent compared to those models without power steering.
The numbered descriptions refer to the EPAS interface diagram shown above:
The XUV825M S4 and XUV855M S4 models feature seating for four. The rear seat converts to provide a flat surface for extra payload and there is sealed under-seat rear storage for additional cargo.
The AMS integration kit allows the customer to mount their StarFire receiver and GreenStar display (both receiver and display sold separately) to their Gator Utility Vehicle.
Key features of the AMS integration kit:
Common applications:
Compatibility:
Rubber squeegee
Contact your local John Deere dealer for availability and pricing information.
POWERtach rubber squeegeeOrder number: LPPK150
POWERtach is a U.S.-registered trademark of POWERtach company.
The operator protection system (OPS) poly rear window is an excellent solution for operators seeking to reduce dust and air flow throughout the operator station when coupled with a half or full windshield (vent open for best results). Made out of high-impact-strength abrasion-resistant polycarbonate material, this rear window is highly durable and scratch resistant. It also attaches to and detaches from the OPS with ease, thanks to the quick-clamp mounting system.
Compatible with Gator™ XUV625i, XUV825i, XUV825i S4, XUV855D, XUV855D S4, and HPX Utility Vehicles.
Improve the OPS Poly Cab seal on the Gator™ Utility Vehicle with the addition of the seal kit which installs around the doors, windshield, roof, and cab frame.
Compatible with OPS Poly Cabs installed on 4 passenger XUV825i/E/M and XUV855D/E/M Gator™ Utility Vehicles.
The rear panel for the OPS poly cab is ideal for outdoor enthusiasts and others desiring four-season weather protection.
The Poly Cab is sold as individual components; OPS poly or glass windshield, OPS poly roof, OPS rear panel, and doors kit. This gives operators the flexibility to configure the vehicle to meet their unique needs.Key features of the rear panel:
Compatible with:
The poly cab doors for the operator protection system (OPS) poly cab is ideal for outdoor enthusiasts. Doors are not sealed for water tight performance.
The poly cab is sold as individual components; OPS poly or glass windshield with wiper, OPS poly roof, OPS rear panel, and the doors kit. This gives operators the flexibility to configure the vehicle to meet their unique needs.
Key features of the poly cab doors:
Optional accessories designed to integrate with the OPS poly cab system:
The 5-gal. (18.9-L) pail holder is ideal for operators who want to maximize the work capability of their Gator™ Utility Vehicle. The 5-gal. (18.9-L) pail holder keeps pails in place within the cargo box, ensuring that they stay safe and secure. Featuring the quick-clamp mounting system, it mounts easily to the cargo rails of the cargo box with just one clamp.
The cargo bed extender conveniently extends the rear of the cargo bed, and also acts as a cargo box divider when it is flipped inside of the cargo box. The cargo bed extender easily flips in or out with the use of quick-pull pins.
The deluxe cargo box bed mat not only protects the steel floor from scratches and dents, it also provides additional cushioning and slip resistance to items being hauled in the cargo box.
The Gator™ XUV Series can be equipped with an optional divider for the deluxe cargo box. The dividers can be positioned at the front or rear of the cargo box bed. To change positions of the dividers, simply release the speedrail locks by hand and slide into new position, then close the locks to secure the dividers.
The cargo box side extension kit expands the versatility of the Gator™ Utility Vehicles and is ideal for those who are enhancing their property and landscape. The extensions allow operators to haul twice the volume (not to exceed cargo box weight capacity) of light material such as grass clippings and mulch.
Product features include:
NOTE: The cargo box side extensions are not intended to increase the rated cargo box carrying capacity per the vehicle specification.
This sportsman case from Black Mountain All-Terrain is a great storage upgrade to the bed of all Gator XUV Full-Size Utility Vehicles including XUV835, XUV865, XUV625, XUV825, XUV825 S4, XUV855, and XUV855 S4 models, as well as the Work Series Utility Vehicles including HPX615E, HPX815E, TE, TH, and TX models.
The case is 127-cm (50-in.) long, 22.9-cm (9-in.) wide, 38.1-cm (15-in.) high, and weighs 7.7 kg (17 lb).Realtree EDGE is a trademark of Jordan Outdoor Enterprises, Ltd.
A – Fender flare
B – Fender
The rear fender flare kit minimizes debris from reaching the operator station.
The side tool rack enables the user to maximize the use of their cargo box by carrying long-handled tools, such as trimmers, shovels, and rakes, on the outside of the box. The holders are adjustable, allowing the users to carry a wide array of items in the racks.
Easily mount a spare tire to the side of the cargo box with this convenient kit.
Recommended to carry spare front tire, as the front tire can be mounted on either the front or rear hubs.
The Gator™ utility vehicles can be equipped with an optional power lift for the cargo box. This is one of the most important accessories for increasing work efficiency. It is an excellent complement to these highly capable utility vehicles.
Gator™ HD XUV bench seat cover
Ordering information Contact the local John Deere dealer for availability and pricing information.
Description:
NOTE: Compatible with all Gator HPX Utility Vehicles if equipped with an optional 51-mm (2-in.) front receiver hitch. An optional 51-mm (2-in.) rear receiver is not available for the Gator HPX models. A 32-mm (1-1/4-in.) rear receiver hitch and drawbar are available for the Gator HPX models.
The washable rubber mat protects the vehicle floor.
Compatible with Gator HPX, XUV 625i, XUV 825i, XUV 825i S4, XUV 855D, XUV 855D S4, M-Gator™ A2 Military, and M-Gator A3 Military Utility Vehicles.
The removable and washable rubber floor mats provide an added layer of protection to the floor of the vehicle, and guards against dents, dings, and scratches.
Compatible with model year 2013-current XUV 825i S4 and XUV 855D S4 Utility Vehicles.
Expand the work capabilities of a Gator™ Utility Vehicle with the addition of the front hood rack designed specifically for all model year 2011 Gator XUV625i, XUV825i, XUV855D, and M-Gator A2 Utility Vehicles. This generously sized rack (121.9-cm [48 in.] long x 34.3-cm [13.5 in.] wide x 8.9-cm [3.5 in.] deep) will haul up to a 45.4-kg (100-lb) payload.
It is also compatible with model year 2013-current Gator XUV825i S4 and 855D S4 Utility Vehicles, and model year 2018-current gas and diesel HPX Utility Vehicles.
The rack easily mounts to the required BM22841 front brush guard. Once mounted, the rack tilts forward with the brush guard to allow full access to under-hood storage and service points.
The front hood rack is compatible with the occupant protective structure (OPS), OPS poly windshields, and deluxe cab system. The front windshield will open to the vent position, but it will not open all the way unless the front hood rack is swung forward.
The cargo box fender guards offer enhanced styling in addition to heavy-duty protection to the side of the cargo box:
NOTE: BM22767 rear bumper is required to install the cargo box fender guards.
CV guards add additional protection for the A-arms and CV half shafts:
The heavy-duty fender guards provide a modern and aggressive appearance for all model year 2011-current Gator™ XUV625i, XUV825i, XUV855D, and M-Gator A2 Utility Vehicles.
It is also compatible with model year 2013-current Gator XUV825i S4 and 855D S4, and model year 2018-current gas and diesel HPX Utility Vehicles.
NOTE: Images above show brush guard with Adventure light kit installed.
The heavy-duty brush guard provides a modern and aggressive appearance for all model year 2011 to current Gator™ XUV625i, XUV825i, XUV855D, and M-Gator A2 Utility Vehicles. It is compatible with model year 2018-current gas and diesel HPX Utility Vehicles.
The rear bumper offers stylish, heavy-duty rear protection to the vehicle.
CV guards add additional protection for the A-arms, brake lines, and CV half shafts:
The brake and taillight protector offers increased protection to the taillight assembly from incidental contact.
The beacon light harness kit is required when installing the beacon light.
The kit includes the switch to mount in the operator protection system (OPS) switch bank and wire harness between the OPS switch bank and beacon light.
The brush guard light harness kit is required when installing the light kits to the brush guard on Gator™ utility vehicles.The kit includes the switches and wire harnesses.
The front OPS/roof light harness kit is required when installing the light kits to the front of the OPS or roof. Also requires OPS switch bank.
The kit includes the switch and wire harnesses from the OPS switch bank to the lights.
The turn signal light harness kit is required when installing the turn signal light kit.
The kit includes the switches and wire harnesses.
Compatible with Gator™ HPX, XUV560, XUV550, XUV590i, XUV590i S4, XUV625i, XUV825i, XUV825i S4, XUV855D, and XUV855D S4 Utility Vehicles.
Three directional louvers provide windshield defrosting and complete operator comfort.
Kit includes:
Heater outputs around 9800 BTU
Compatible with the following vehicles:
The switch mounts on the dash of the vehicle, while the wiring harness connects to the main vehicle harness.
Features and benefits:
The integrated brake and taillight kit offers an updated stylish design in addition to being highly visible in all light conditions.
NOTE: For model year 2018 and newer HPX615 and HPX815 Utility Vehicles, the reverse lights will not illuminate.
Product attributes:
The rear OPS/roof light harness kit is required when installing the light kits to the rear of the OPS or roof on the Gator™ S4 Vehicles. Also requires OPS switch bank.
Increase the capability of the Gator™ Utility Vehicle by adding work lights. Lights mount to the front or rear of the poly roof or directly to the operator protection system (OPS).
Kit includes the pair of work lights and hardware. Requires necessary light harness kit based on desired mounting location.
Lights can also be installed in a low mount position behind the front bumper.
The OPS rearview mirror for Gator™ Utility Vehicles can be installed when equipped with an OPS.The rearview mirror can be positioned in multiple locations on the OPS and offers expanded visibility for the operator.Product attributes include:
The OPS side mirrors for Gator Utility Vehicles can be installed when they are equipped with OPS.
The side mirrors can be positioned in multiple locations on the OPS and offers expanded visibility for the operator.
Product attributes include:
NOTE: OPS side mirrors are not compatible with the deluxe cab or poly cabs (poly cabs include standard mirrors).
The OSR door kits are replacement kits for the factory-installed OSR doors, or can be installed on vehicles that had the OSR nets installed from the factory. These OSR doors can only be installed on model year 2014 or later Gator™ HPX, XUV625i, XUV825i, XUV825i S4, XUV855D, and XUV855D S4 Utility Vehicles.The OSR color panels are sold separately, and can be installed on the OSR doors or the deluxe poly door.
NOTE: Not compatible with deluxe cab frames.The OPS stereo mounting kit includes the mounting kit only; the customer must choose one of the following three-head units to have a complete stereo:
SIRIUS is a U.S.-registered trademark of SIRIUS XM Radio Inc. iPod is a U.S.-registered trademark of Apple Incorporated.
NOTE: Must be removed for transport on an open trailer or truck.
Contact the local John Deere dealer for availability and pricing information.
Features of the OPS poly roof include:
Features:
Ordering informationAvailable through Order Zone. Contact the local John Deere dealer for availability and pricing information.
Available through OrderZone
Each kit contains: one bench base cover, one backrest cover, and installation instructions
Special features:
Cordura is a trademark of INVISTA for durable fabrics. REALTREE HARDWOODS HD is a trademark of Jordan Outdoor Enterprises Limited.
Cordura is a trademark of INVISTA for durable fabrics.
Special Features:
Kit includes two comfort straps for the left and right seat belts.
A seat belt comfort strap is available for Gator™ Utility Vehicles equipped with an Occupant Protective Structure (OPS) or roll-over protective structure (ROPS).
The 45-gal. (170-L) Gator bed sprayer is designed to work with the Gator vehicles equipped with the steel bed or deluxe cargo box. It provides an excellent way to apply spray materials such as liquid fertilizer, weed killer, tree spray, and de-icer. It comes complete with a 43-in. boom that sprays a 120-in. swath. It's equipped with a 20-ft hose and a spray wand for spot spraying lawns, shrubs, trees, etc. The fully adjustable brass spray wand tip achieves streams up to 30 ft. It comes equipped with rubber feet and custom brackets, which secure to the Gator bed, for a no tools mount.
Capacity
45 U.S. gal. (170 L)
Pump
Type
Electric motor and diaphragm
Manufacturer
SHURflo®
Operating pressure
100 psi
Current draw
7 amp
Valve material
Viton®
Diaphragm material
Santoprene™
Spray flow rate
Sump strainer
Stainless steel
Remote spray method
Spray wand
Polypropylene with Viton components
Tip material
Brass
Boom
Mounting
Compatibility
All Gator models except CX
Shipping weight
68 lb (31 kg)
Net weight
64 lb (29 kg)
45-gal. (170-L) Gator bed sprayerOrder number: LP20852
SHURflo is a U.S.-registered trademark of Sta-Rite Industries, LLC. Viton is a U.S.-registered trademark of DuPont Performance Elastomers. Santoprene is a trademark of Exxon Mobil Corporation.
The high-performance Gator bed sprayer is designed to work with Gator vehicles equipped with the deluxe cargo box or steel bed. With a 45-gal. (170-L) capacity, high volume electric pump, and premium pistol grip spray gun, it provides an excellent way to apply spray materials such as liquid fertilizer, weed killer, tree spray and de-icer. Engineered brackets secure the sprayer to the Gator bed with no tools, or additional tie-downs required.NOTE: Sprayer shown above with optional 150-in. precision boom (LP22885).
High-performance features:
45 psi
Poly, alloy, and brass with Viton components
Brass and stainless
Gauge
Spray control
Pressure regulation/recirculation
Remote control
12V receiver with dual FOB remote on/off
Boom (sold separately)
All Gator models (except CX)
56 lb (25 kg)
52 lb (23 kg)
High-performance 45-gal. (170-L) Gator bed sprayerOrder number: LP22908
The improved 25-gal. (95-L) Gator bed sprayer is designed to work with all steel bed and deluxe cargo box Gator Utility Vehicles (except CX), and provides an excellent way to apply spray materials such as liquid fertilizer, weed killer, tree spray, and de-icer. It comes complete with a 109-cm (43-in.) boom that sprays a 304.8 cm (120-in.) swath. It is equipped with a 5.8-m (19-ft) hose and a spray wand for spot spraying lawns, shrubs, trees, etc. The fully adjustable brass spray wand tip achieves streams up to 9.1 m (30 ft). Engineered brackets secure the unit to Gator bed with no tools or additional strapping required.
25 U.S. gal. (95 L)
SHURflo
Strainer
Boom spray width
120 in. (305 cm)
Spray tip(s)
Three TF-VP3
2.1 U.S. gpm (7.9 L/min)
Remote spray
19-ft hose with adjustable polypropylene handgun with 14-in. wand
Handgun material
Adjustment
Fan-to-stream
40 lb (18 kg)
Warranty
Two year
25-gal. (95-L) Gator bed sprayerOrder number: LP33597
The 25-gal. (94 L) portable sprayer is ideal for caring for shrubs, decorative trees, and fruit trees.
Additional features include:
NOTE: Sprayers are compatible with competitive tractors (if equipped with a 12-V battery and charging system).
These liquid sprayers are especially suited for maintaining residential and small commercial properties:
Following are the advantages of using liquid fertilizer over dry fertilizer:
NOTE: Use these sprayers with liquid-base lawn care chemicals only. Not recommended for wettable powders as no agitating system is provided to prevent particles from separating out.Compatible with all Gator models except XUV 550, XUV 550 S4, and RSX850i Utility Vehicles.
25-gal. (94 L) portable sprayerOrder number: LP19490
The sprayer is a self-contained unit that allows the user to spray trees and shrubs with the spray wand or broadcast spray in a 3.05-m (10-ft) swath with the spray boom.
Contact your local John Deere dealer for availability and pricing information.170-L (45-gal.) Gator bed sprayerOrder number: LP20851
The 340-L (90-gal.) Gator bed sprayer is designed to work with any Gator model with load capacities of 363 kg (800 lb) or greater. Extreme capacity is great for athletic fields, a farmette, commercial maintenance, or any large property. It provides an excellent way to apply spray materials such as liquid fertilizer, weed killer, tree spray, and de-icer. It comes complete with a 109-cm (43-in.) boom that sprays a 3.05-m (10-ft) swath. Engineered brackets secure the sprayer to the Gator bed with no tools or additional tie-downs required.
340-L (90 U.S. gal.)
Shurflo
6.9 bar (100 psi)
Viton™
All Gator models with bed capacity of 363 kg (800 lb) or greater
20 kg (125 lb)
19 kg (80 lb)
Contact a local John Deere dealer for availability and pricing information.
340-L (90-gal.) Gator bed sprayerOrder number: LP20853
Viton is a trademark of The Chemours Company FC, LLC. Santoprene is a trademark of Exxon Mobil Corporation.
The high-performance Gator bed sprayer is designed to work with Gator vehicles equipped with the deluxe cargo box or steel bed. With a 340-L (90-gal.) capacity, high-volume electric pump, and premium pistol grip spray gun, it provides an excellent way to apply spray materials such as liquid fertilizer, weed killer, tree spray and de-icer. Engineered brackets secure the sprayer to the Gator bed with no tools, or additional tie-downs required.NOTE: Sprayer shown above with optional 7.3-m (24-ft) boomless spray nozzles (LP22884).
340 L (90 U.S. gal.)
12-V receiver with dual FOB remote on/off
All Gator models with a bed capacity of 363 kg (800 lb) or greater
57 kg (125 lb)
45 kg (100 lb)
340-L (90-gal.) high-perfromance Gator bed sprayerOrder number: LP22909
TeeJet is a trademark of Spraying Systems Co. Viton is a trademark of The Chemours Company FC, LLC. Santoprene is a trademark of Exxon Mobil Corporation.
The high-performance (HP) single-tank 340.7-L (90-gal.) Gator bed sprayer is designed to work with Gator vehicles equipped with the deluxe cargo box that have a capacity in excess of 362.9 kg (800 lb). The custom molded 340.7-L (90-gal.) tank provides a low profile with capacity perfect for athletic fields, farmettes, commercial maintenance, or any large property. It provides an excellent way to apply spray materials such as liquid fertilizer, weed killer, tree spray, and de-icer. Custom engineered mounting hardware ensures the unit stays secure without the use of additional straps or tie-downs. Cover ground quickly with flexible boom options. (Boom sold separately).
The standard Gator boom is compatible with all Gator sprayer models and is sold separately for the HP Gator sprayers. This fixed boom is conveniently sized at 43 in. (1.1 m) and does not extend wider than the Gator bed, but it is perfect for covering ground quickly and thoroughly with a 120-in. (3-m) spray swath.
The boom is ideal for basic spraying application. Three tips and check valves round out this offering (boom only, mounting brackets are provided with sprayers).
The 150-in. (3.81-m) precision boom is compatible with the HP sprayers. This folding boom is made to cover ground quickly and thoroughly with five precision spray tips, TeeJet™ nozzle bodies and commercial grade diaphragm check valves. The outer tips offer versatility with built-in shut offs to allow an adjustable 90-in. (2.3-m), 120-in. (3-m), or 150-in. (3.8-m) spray swath.
TeeJet is a registered trademark of Spraying Systems Company.
The 24-ft (7.3-m) boomless spray nozzles are compatible with all HP sprayers. This boom is perfect for covering ground quickly and thoroughly with a 24-ft (7.3-m) spray swath. It is ideal for uneven terrain or where precision spray application is not necessary. TeeJet™ nozzle bodies and commercial grade diaphragm check valves round out this offering.
The HP 45-gal. (170-L) Tow-Behind Sprayer offers the ultimate in performance and versatility. With a 45-gal. capacity, high volume electric pump, and premium pistol grip spray gun, it provides an excellent way to apply spray materials such as liquid fertilizer, weed killer, tree spray and deicer. It is the perfect match for the customer who wants extreme performance.
The heavy-duty frame rolls smoothly on 15x6 tires that minimize ground compaction and have a low profile, which maintains a low center of gravity for excellent stability. Cover ground quickly with flexible boom options; a 150 in. (3.8 m) precision folding, 120-in. (3-m) standard three tip, 24-ft (7.3-m) boomless, or no boom at all (boom sold separately).
SHURflo is trademark of SHURflo, LLC. TeeJet is a registered trademark of Spraying Systems Company.
The 45-gal. (170-L) trail-type sprayer is equipped with a boom that sprays a wide, 120-in. width.
A 20-ft hose and handgun are provided.
The heavy-duty frame rolls smoothly on 15x6 tires that minimize ground compaction.
Electric motorand diaphragm
Three #11008VP
20-ft hose with adjustable polypropylene handgun with 14-in. wand
Tires
15x6-6 pneumatic
Wheel bearings
Roller bearings
Axle diameter
1 in. (2.5 cm)
Hitch
Pin and spring clip, four height positions
Weight - empty
80 lb (36.3 kg)
Weight - full
456 lb (207 kg)
Compatible with all Gator models except XUV 550, XUV 550 S4, and RSX Utility Vehicles.
45-gal. (170-L) tow-behind sprayerOrder number: LP20485
SHURflo is a U.S.-registered trademark of SHURflo, LLC. Viton is a U.S.-registered trademark of DuPont Performance Elastomers. Santoprene is a trademark of Exxon Mobil Corporation.
The 0.3-m3 (10-cu ft) in-bed spreader easily expands the capabilities and productivity of operators with Gator XUV825 and XUV855 Full-Size Crossover and HPX Work Series Utility Vehicles. Featuring exclusive controls and ample hopper capacity, these spreaders are the ideal spreading solution to help operators quickly apply large amounts of ice melt materials.
The 0.3-m3 (10-cu ft) in-bed spreader is compatible with the following models:
17AT Cart
Order number: LPPCT17ATJD
The Gator™ electric fertilizer spreader is the ideal solution for medium to large size jobs. This unit is engineered to fit heavy-duty XUV Gator Utility Vehicles and designed with a versatile hitch mechanism (sold separately) that allows quick and secure attach/detach capability for easy bed access or switching to a Gator salt spreader. Convenience is at the operator’s fingertips with an electronic variable-speed spinner and electronic gate control from the Gator seat. Adjustable flighting allows spread pattern control to make sure the material is applied where it is needed.
The mounting hitch and control box are sold separately, available through Order Zone.
Ideal for:
Capacity:
Includes:
The Gator™ electric salt spreader is the ideal solution for medium to large size jobs. This unit is engineered to fit heavy-duty XUV Gator vehicles and designed with a versatile hitch mechanism (sold separately) that allows quick and secure attach/detach capability for easy bed access or switching to a Gator fertilizer spreader. The Gator salt spreader features an electric-driven auger for consistent salt presentation to the spinner. It draws power from the Gator vehicle, so no external power source is needed. It is powered by a variable-speed controller (sold with hitch) for precise spread pattern control.
The mounting hitch and control box are sold separately. Available through Order Zone.
Gator XUV 620i and 850D Utility Vehicles and XUV 625i, 825i, and 855D Utility Vehicles pre model year 2011 must purchase the Gator hitch mounting brackets, sold separately through Order Zone.
The Gator™ Drop Spreader features heavy-gauge stainless steel construction along with stainless-steel fasteners for exceptional durability in harsh conditions. The segmented rotor accurately meters material and evenly distributes material across the drop width. An industry-exclusive removable rotor tray allows for quick and easy clean out. Ideal for spreading large granular materials (such as rock salt). The 109-cm (43–in.) width is ideal for sidewalks and is suited well for snow and ice contractors, colleges and universities, hospital and health campuses, municipalities and schools, retirement home campuses, etc.
The Gator™ hitch and electric control box for the salt/fertilizer spreader is engineered to fit your heavy-duty XUV Gator Utility Vehicles. This spreader hitch frame is designed with a versatile spring loaded mechanism to allow quick and secure attach/detach capabilities of your spreader. The hitch can easily be lowered, by the use of spring loaded pins, allowing the cargo box to be tilted. Frame features:
The electronic control box is designed to operate both the Gator fertilizer and salt spreader. The fully electronic control box accommodates a variable speed spinner control for both spreaders, and electronically actuated gate control for the fertilizer spreader. The weather-resistant box includes the switches, wiring and hardware for convenient dash mounting, allowing full control from the seat of the Gator.
Control box features:
The 21 Steel Utility Cart is the ideal companion for the Gator™ Utility Vehicle:
21 Steel Utility CartOrder number: LPUT21JD
NOTE: Available through OrderZone.
The large MOLLE storage pouch is compatible with bench seat covers and the operator protection system (OPS) MOLLE storage panel.
CORDURA is a trademark of INVISTA North America, LLC. Realtree Hardwoods HD is a trademark of Jordan Outdoor Enterprises, Ltd.
Compatible with bench seat covers and operator protection system (OPS) MOLLE storage panel
The MOLLE fire extinguisher pouch is compatible with bench seat covers and the operator protection system (OPS) MOLLE storage panel.
The small MOLLE storage pouches are compatible with bench seat covers and the operator protection system (OPS) MOLLE storage panel.
Cordura is a trademark of INVISTA North America, LLC. Realtree Hardwoods HD is a trademark of Jordan Outdoor Enterprises, Ltd.
This water bottle pouch attaches to the backrest of utility vehicle seat covers that use the military-inspired modular lightweight load-carrying equipment (MOLLE) attachment system. The pouch fits up to a 0.95-L (32-oz) wide-mouth bottle.
CORDURA is a trademark of INVISTA North America S.a.r.l. Realtree EDGE is a trademark of Jordan Outdoor Enterprises, Ltd.
This custom toolbox was specifically designed for users desiring more integrated sealed storage in a cargo box.
Side-door opening toolbox features:
Weight
29 kg (64 lb)
34 kg (75 lb)
Dimensions
Full box: 109.4-cm (43.1-in.) long, 35-cm (13.8–in.) wide, and 32.5-cm (12.8–in.) tall
The toolbox can be installed in minutes by simply removing the cargo box sides and tailgate and bolting the toolbox onto the cargo box.
The toolbox requires the tailgate with brake and tail lights kit (BM26161) and optional label kit:
This toolbox is compatible with the following Gator™ Utility Vehicle models:
Features of the soft rear screen and organizer:
Compatible with: HPX, XUV 825i, XUV 825i S4, XUV 855D, and XUV 855D S4 Series Gator™ Utility Vehicles equipped with an occupant protection system (OPS).
Ordering informationContact the local John Deere dealer for availability and pricing information.
Soft rear screen and organizer - blackOrder number: LP93207
Top door opening toolbox features:
Top door opening toolbox
Toolbox weight
32.7 kg (72 lb)
Toolbox capacity
32.7 kg (75 lb)
Toolbox dimensions
-Tray: 27.4-cm (10.8-in.) long x 21.8-cm (8.6-in.) wide x 7.1-cm (2.8–in.) deep -Left-hand side compartment: 46.2-cm (18.2–in.) long X 32.5-cm (12.8–in.) wide X 35.3-cm (13.9–in.) tall -Right-hand side compartment: 62.7-cm (24.7–in.) long X 32.5-cm (12.8–in.) wide X 35.3-cm (13.9-in.) tall
-125-L (33-gal.) total volume
The toolbox can be installed in minutes by simply removing the cargo box sides and tailgate, and bolting the toolbox onto the cargo box.
Play, work, and explore in all four seasons. Wheeled utility vehicles get buried very quickly in deep snow, swamps, sand, or muddy ground conditions. Adding a Camso® tracks system improves floatation and traction and takes you where wheels simply cannot go. Get true four-season capability without compromising winter performance with Camso track kits that install easily in one hour. When the snow goes, switch back to wheels in an hour or less.
Camso has the only system on the market with anti-rotation on the rear spring that allows the rear of the track to swing upwards to climb on top of any difficult surface.Drive sprockets are designed specifically for use on the XUV.NOTE: Not compatible with standard straight blade, v-blade, front fender guards, rear bumper, and rear fender guards.Camso is a trademark of Artic Investments S. A.
NOTE: Not intended for use on public roadways.
This winch also requires a winch mount kit and a 50.8-mm (2-in.) front receiver with recovery loops. Parts in the kit:
WARN is a trademark of WARN Industries, Inc.
Double the pulling power, change the pulling direction, and keep the winch in proper working order.The accessories kit is essential gear for operators getting the most out of their winch:
The accessories kit includes:
Each kit comes in a black Cordura® heavyweight-nylon soft case.
Cordura is a trademark of INVISTA.
The bumper mount kit includes all of the necessary wire harnesses, contactor mounts, and hardware to mount the WARN® VRX 1588-kg (3500-lb) winch (sold separately) to the front bumper of the heavy-duty XUV S4 models.This kit is compatible with model year 2013 and newer XUV825 S4 and XUV855 S4 Gator™ Utility Vehicles.WARN is a trademark of Warn Industries, Inc.
The bumper mount kit includes all of the necessary wire harnesses, contactor mounts, and hardware to mount the WARN® VRX 2041-kg (4500-lb) winch (sold separately) to the front bumper of the heavy-duty XUV S4 models.This kit is compatible with model year 2014 and newer XUV825 S4 and XUV855 S4 Gator™ Utility Vehicles.WARN is a trademark of Warn Industries, Inc.
The receiver mount kit includes all of the necessary wire harness, contactor mounts, winch carrier, and hardware to be able to mount the WARN® VRX 1588-kg (3500-lb) winch (sold separately) to the front or rear receiver of the heavy-duty XUV S4 models.The kit is compatible with model year 2013 and newer XUV825 S4 and XUV855 S4 Gator™ Utility Vehicles.WARN is a trademark of WARN Industries, Inc.
Ordering information:Available through Order Zone. Contact the local John Deere dealer for availability and pricing information.
Product attributes
The abrasion-resistant full windshield features:
Makrolon is a trademark of Bayer Aktiengesellschaft.
The abrasion-resistant half windshield features:
The glass windshield with wiper features:
The windshield requires an OPS switch bank (sold separately) to mount the switch.
Especially useful for working around properties and job sites, the windshield washer kit includes these components:
The reservoir assembly bolts to the frame. A convenient three-position rocker switch controls the windshield wiper and washer fluid. As with all Gator™ Utility Vehicle electrical kits, the washer kit ties into the vehicle's wiring harness for quick installation.
Monthly Loan Payment:
Interest Paid:
Total of principal plus Interest:
**The accuracy of this calculator and its applicability to your circumstances is not guaranteed. You should obtain personal advice from qualified professionals. This information is provided for illustrative purposes only and does not constitute an application. This notice does not guarantee loan approval, nor is it an offer or commitment to make a loan to you on the above terms.
All fields marked with * are required.